 |
|
 |
Bronze Vise Type Connectors
Silicon bronze clamps adjustable by single hex head screws, used to connect various size grounding conductors, as well as pole line apparatus to grounding conductors.
Features
- Casting and bolt are both made of silicon bronze for greater strength, conductivity, and corrosion resistance.
- Install using the standard can wrench.
|
|
Ordering Information
EM 2370
Manufactured to Bell Spec CA08980 (H1). It accommodates:
- Single or multiple #6 AWG wires solid or stranded.
- #6 AWG to #10 or #12 AWG.
- From single 2-pair BSW metallic shield, to three 2-pair BSW metallic shields.
Standard packaging: 100/bx, 8 lb/bx. [Please note: There is no minimum order. When ordering, the number you enter for “Quantity” will indicate the number of clamps, not the number of boxes.]
EM 2371
Silicon bronze clamp similar to the EM 2370, only with the addition of “tongue and groove” type alignment channels to keep the two halves of the clamp in proper alignment with each other.
RUS Listed
Add suffix -T for a tin-plated clamp.
Add suffix -BA for a torque shear head.
Standard packaging: 5/bg, 100/bx, 10 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 2371-2
Silicon Bronze Clamp with a vibration-resistant screw.
Add suffix -T for a tin-plated clamp.
Add suffix -BA for a torque shear head.
 EM 2371-BA (with torque shear head)
Standard packaging: 5/bg, 100/bx, 9 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 2372
H2 silicon bronze clamp.
Accommodates:
- #12–#4 AWG solid.
- 1/0 B, C, or D stranded copper to #6, #8, #10, #12 AWG solid bare copper wire.
- 6.6–10M support strand to #6, #8, #10, #12 AWG solid bare copper wire.
Add suffix -T for a tin-plated clamp.
Standard packaging: 5/bg, 100/bx, 15 lb/bx. No minimum order.
EM 2372-2
H2 silicon bronze clamp with a vibration-resistant screw.
Accommodates:
- #12–#4 AWG solid.
- 1/0 B, C, or D stranded copper to #6, #8, #10, #12 AWG solid bare copper wire.
- 6.6–10M support strand to #6, #8, #10, #12 AWG solid bare copper wire.
Add suffix -T for a tin-plated clamp.
EM 2372-BA02
H2 silicon bronze clamp with a vibration-resistant screw and torque shear head.
Accommodates:
- #12–#4 AWG solid.
- 1/0 B, C, or D stranded copper to #6, #8, #10, #12 AWG solid bare copper wire.
- 6.6–10M support strand to #6, #8, #10, #12 AWG solid bare copper wire.
Add suffix -T for a tin-plated clamp.
EM 2372CC
Similar to EM 2372 (above), with the addition of:
- Tin plating for corrosion resistance and compatibility with aluminum;
- Additional wire termination point for capturing extra wires, to allow the connection of dissimilar wires, such as copper and aluminum;
- Stainless steel bolt for mechanical strength and corrosion resistance.
EM 2374
Used for attaching a solid or stranded #4 AWG through #8 AWG wire to a #4 AWG conductor run.
Add suffix -SH for a shear-off bolt.
Add suffix -BR for a shear-off zinc cap.
Add suffix -BV for a shear-off zinc cap and anti-loosening device.
Standard packaging: 100/bx, 16 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of boxes.]
EM 2375
Used for attaching a solid or stranded #2 AWG through #6 AWG wire to a #2 AWG conductor run.
Add suffix -SH for a shear-off bolt.
Add suffix -BR for a shear-off zinc cap.
Add suffix -BV for a shear-off zinc cap and anti-loosening device.
Standard packaging: 100/bx, 3 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of boxes.]
EM 2376-SH
Accommodates #6 AWG–#2 AWG str, .162"–.320" (4.12–8.14mm).
Add suffix -SS for a stainless steel bolt.
Remove suffix -SH for a clamp without torque shear head.
EM 2377-SH
Accommodates #2 AWG solid–#2/0 AWG str, .286"–.438" (7.28–11.15mm).
Add suffix -SS for a stainless steel bolt.
Remove suffix -SH for a clamp without torque shear head.
EM 2379-SH
Accommodates #1/0 str–#4/0 str, .390"–.552" (9.93–14.05mm).
Add suffix -SS for a stainless steel bolt.
Remove suffix -SH for a clamp without torque shear head.
EM 2380
Accommodates two conductors, #1/0 str–350 kcmil, .325"–.710" (8.27–18.07mm). 1/2–20 bolt, 3/4" hex head. Stainless steel bolt and flat washer.
EM 2381
Accommodates two conductors, #4/0 str–500 kcmil, .522"–.813" (13.28–20.69mm). 1/2–20 bolt, 3/4" hex head. Stainless steel bolt and flat washer.
EM 2382
Accommodates two conductors, 250–750 kcmil, .550"–.998" (14.00–25.40mm). 1/2–20 bolt, 3/4" hex head. Stainless steel bolt and flat washer.
EM 2383
Accommodates two conductors, 400–1000 kcmil, .726"–1.152" (18.48–29.32mm). 1/2–20 bolt, 3/4" hex head. Stainless steel bolt and flat washer.
EM 0174P
Connector for #1/0 str and #6 AWG or plain bonding ribbon.
Standard packaging: 100/bx, 14 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of boxes.]
EM 0174PBV
Same as EM0174P (above), with shear-off zinc cap and anti-loosening device.
EM 2360
Round body clamp for:
- Single or multiple #6 AWG wires solid or stranded.
- #6 AWG to #10 or #12 AWG.
- From single 2-pair BSW metallic shield, to three 2-pair BSW metallic shields.
EM 0164
Connector for plain bonding ribbon to plain bonding ribbon, or ribbon to #6 AWG solid ground wire.
RUS Listed.
Standard packaging: 5/bg, 100/bx, 12 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 0164P
Tin-plated version of EM 0164 (above).
EM 0164BV
Same as EM 0164 (above), with shear-off zinc cap and anti-loosening device.
EM GC-268
Bronze grounding connector for conductor to 1/4"–5/8" ground
rod, #6 solid AWG–#10 solid AWG.
EM 0167
Tin-plated bronze C connector with teeth for piercing the messenger insulation of Figure 8 cable. For messenger diameters of .146"–.312" (3.71–7.94mm) and ground conductor range of .146"–.312". Available with stainless steel or bronze bolt.
Standard packaging: 100/bx, 23 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of boxes.]
EM 0167BV
Same as EM 0167 (above), with shear-off zinc cap and anti-loosening device.
EM GC-8010-1
Bronze spacer type distribution connector, #1/0 solid, #1 stranded.
(See tin-plated version, EM GC-8010-P, below.)
EM GC-8020-2
Bronze spacer type distribution connector, #3/0 solid, #2/0 stranded; min. #8 solid.
(See tin-plated version, EM GC-8020-P, below.)
EM 8040
Bronze spacer type distribution connector, #4/0 solid, #4/0 stranded; min. #6 solid.
EM GC-8010-P
Bronze spacer type distribution connector, #1/0 solid, #1 stranded, same as EM GC8010-1 (above), except tin plated. RUS/REA listed for connection to galvanized steel strand or aluminum-clad steel strand.
EM GC-8020-P
Bronze spacer type distribution connector, #3/0 solid, #2/0 stranded; min. #8 solid, same as EM GC8020-2 (above), except tin plated. RUS/REA listed for connection to galvanized steel strand or aluminum-clad steel strand.
EM GC-268-SS
Bronze grounding connector for conductor to 1/4"–5/8" ground
rod, #6 solid AWG–#10 solid AWG (same as EM GC-268, above), except with stainless steel bolt and washer, and no breakaway bolt head.
|
|
