 |
 |
|
 |
Meter Box Clamps
Ordering Information
EM 5907PT
Drewes Meter Box Clamp
7" strap, #12–#16 AWG, 1/2"–2" OD. (12" strap available below.)
Standard packaging: 10/bg, 100/bx, 14 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
With toothed strap and clip nut, designed to attach to the hub of an electrical meter box.
Features
- Will not damage the factory-painted surface of meter box.
- Will not collapse the box because it mounts on the strongest part of the box, the hub.
- Neat low profile, inconspicuous appearance.
- Does not inhibit entry to meter box.
- Accommodates any cylindrical hub mounting.
- Perforations on strap bite through corrosion and paint for better electrical contact.
- Accommodates ground wires #14–#6 AWG.
- Simple two-piece construction for easy installation.
- A copper and brass material for high conductivity.
- Tin plated for corrosion resistance.
EM 5912PT
12" strap (see EM 5907PT, above), #12–#6 AWG, 1/2"–3 1/2" OD.
Standard packaging: 10/bg, 100/bx, 17 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM MB6
Meter box bonding and grounding
connector.
Application
Bonding and grounding telco and CATV to power ground.
Features
- Stainless steel and copper alloy to reduce corrosion.
- Applies with a standard terminal wrench/nut runner—no special tools.
- Gel-filled cap helps prevent corrosion at the piercing points.
- Easy, foolproof installation.
- Mounts on the side—does not interfere with the cover or collapse the sides.
- Small and inconspicuous.
- Accommodates #6–#14 AWG solid or stranded ground wire.
- Makes electrical contact under the dripcap of the box, on bare, unpainted metal.
EM MB5
Meter box bonding and grounding connector.
Application
Bonding and grounding telco and CATV to power ground.
Features
- Stainless steel and copper alloy to reduce corrosion.
- Applies with a standard terminal wrench/nut runner—no special tools.
- Gel-filled cap helps prevent corrosion at the piercing points.
- Easy, foolproof installation.
- Mounts on the side—does not interfere with the cover or collapse the sides.
- Small and inconspicuous.
- Accommodates #6–#14 AWG solid or stranded ground wire.
- Makes electrical contact under the dripcap of the box, on bare, unpainted metal.
EM BB4
Meter box bonding and grounding connector, silicon bronze bolt.
Application
Bonding and grounding telco and CATV to power ground.
Features
- Stainless steel to reduce corrosion.
- Applies with a standard terminal wrench—no special tools.
- Gel-filled cap prevents corrosion on the locating points.
- UL listed for public safety.
- Easy, foolproof installation.
- Mounts on the side—does not interfere with the cover or collapse the sides.
- Small and inconspicuous.
- Accommodates #6–#14 AWG solid or stranded ground wire.
EM MB5-HF
Meter box ground clamp.
Application
Bonding and grounding telco and CATV to power ground.
Features
- Stainless steel and copper alloy to reduce corrosion.
- Applies with a standard terminal wrench/nut runner—no special tools.
- Installation does not cause any damage or distortion to meter box enclosure.
- Easy installation.
- Mounts on the side—does not interfere with the cover or collapse the sides.
- Small and inconspicuous.
- Accommodates #6–#14 AWG solid or stranded ground wire.
- Makes electrical contact under the dripcap of the box, on bare, unpainted metal.
|
|
  |
