 |
 |
|
 |
Special Application Ground Rod Clamps
Ordering Information
EM 2301-01
Two-Bolt Ground Rod Clamps for Ground Rings
Heavy-duty cast silicon bronze body, headed silicon bronze clamping bolts, and nylon locking collars.
Applications
- Ground rings for equipment huts
- Any installation where added security of double bolts is necessary
- 5/8" ground rods
Features
- Can accept ground wires from #10–1/0 AWG
- Available with a front “J” slot to accept #1, #2, or #6 AWG in a continuous “ring” around an equipment hut or building
- Available with pre-set torque shear heads for a pre-determined installation torque and to prevent vandalism
- Nylon locking collar prevents inadvertent loosening of bolts
- Uncomplicated design, craft-friendly, low-cost product
Standard packaging: 5/bg, 25/bx, 14 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 2301-01NB
Same as EM 2301-01 (above), with no torque shear heads.
No minimum order.
EM 2301.75
Same as EM 2301-01 (above,) but accommodates a 3/4" ground rod.
EM 2303
5⁄8" ground rod clamp, two-bolt type with solid body. Torque shear heads at proper installation torque. Connects #12–1/0 AWG solid parallel to rod.
Standard packaging: 5/bg, 25/bx, 12 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 2303-NB
Same as EM 2303 (above), with no torque shear heads.
EM 2303-C
5/8" ground rod clamp, two-bolt type with solid body, torque shear heads, and gel-filled closure. Connects #12–1/0 AWG solid parallel to rod.
Standard packaging: 1/bg, 20/bx, 21 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 2306SIET
Heavy Duty Ground Rod Clamp
Description
A cast bronze two-bolt ground rod clamp for 5/8" or 3/4" diameter rods that will connect one or a multiple of ground wires. Accepts #2 AWG–#10 AWG.
Features
- Cast bronze for superior strength, electrical conductivity, and corrosion resistance.
- Ground wires are captured individually to simplify isolation and location.
- Enlarged opening allows for the “mushroomed” head of a ground rod to pass through without interference.
Applications
Remote sites, central offices, repeater housings, substations—anywhere a single or multiple of ground wires are used.
EM 5834-SS
Larger Ground Rod Clamps
Features
- Stainless and/or bronze construction for superior corrosion resistance.
- Can be applied underneath an existing clamp without removing it.
- Split design allows fast, easy installation.
- Accommodates 5⁄8" and 3⁄4" ground rod, with #6 and #4 AWG ground wire.
- Driven ground rods with a “mushroomed” head do not impair the installation of this clamp.
- The addition of a second flat washer allows the installer to connect an additional ground wire.*
EM 5834-SS - Stainless steel ground rod clamp.
*Add suffix -W for second flat washer.
EM 5834-BR
Bronze larger ground rod clamp.
Add suffix -W for second flat washer.
EM 5834-BRT
Tin-plated bronze larger ground rod clamp.
Add suffix -W for second flat washer.
EM 38DB
Low-Cost Ground Rod Clamps
3/8" ground rod clamp, accommodates #4–10 AWG ground wire.
EM 48DB
1/2" ground rod clamp, accommodates #2–10 AWG ground wire.
EM 58DB
5/8" ground rod clamp, accommodates #2–10 AWG ground wire.
EM 58DBW
5/8" ground rod clamp with wide flange, accommodates #1/0–8 AWG ground wire.
EM 68DB
3/4" ground rod clamp, accommodates #2–10 AWG ground wire.
|
|
  |
