 |
 |
|
 |
Trailer I-Beam Clamps
A tin-plated bronze casting with teeth; brass hex thru-bolt with hole, brass set screw, and bronze lockwasher.
Features
- Applied with the standard terminal wrench.
- Tin plate reduces corrosion.
- Silicon bronze for greater strength and conductivity.
- Perforated bonding ribbon or braid with eyelets attaches under set screw.
Applications
- Grounding to metal buildings, bridges.
- Provides connection for bonding and grounding wires, ribbons, and braid to I-beams.
- Also used as strand clamp (electrical).
|
|
Ordering Information
EM 4014
With ground wire hole and short slot, enabling connection of #6 and #10 AWG simultaneously, as well as #6–#14 AWG individually.
Standard packaging: 10/bg, 100/bx, 23 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 4015
With plain round ground wire hole to accept #6–#14 AWG.
Standard packaging: 10/bg, 100/bx, 23 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 4015C
Larger diameter cross hole accommodates stranded #6 AWG ground wire, .228 diameter, and down to #14 AWG.
EM 4018
With ground wire hole for #6–#14 AWG, and long slot to also connect plain bond ribbon.
Standard packaging: 10/bg, 100/bx, 24 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
EM 4019
Hole and slot combinations accept ribbon, two wires simultaneously, or #6–#14 AWG individually.
Standard packaging: 10/bg, 100/bx, 24 lb/bx. [Please note: There is no minimum
order. When ordering, the number you enter for “Quantity” will indicate
the number of clamps, not the number of bags or boxes.]
|
|
  |
