Electric Motion Company’s aerial transformer ground clamps can be provided the standard way with 1/2-inch x 13 threaded body connecting to the housing.
Alternatively, the ADS series are spade mountable, which means that the jaws of the clamp can be oriented perfectly by the installer. This means a higher quality installation job.
Features
Cast
silicon bronze for long life.
Standard hexes and bolt size.
The 207 series connects #6 AWG–#1/0 ground wire; the 209
series connects #3 AWG solid–#4/0 stranded.
Benefits
Spade mount allows exact orientation so ground wire has no sharp
bends.
Spade mount uses same 1/2" x 13 bolt provided with
transformer.
EM ADS-207-90 allows wrench clearance away from transformer for ease of
installation.
EM ADS-207 captures ground wire in clamp jaws, but next to transformer
can for added safety.
Ordering Information
EM 207 Transformer ground clamp; connects #6 AWG through #1/0 ground wire.
Add suffix -T for tin plating.
EM ADS-207 Spade mountable transformer ground clamp; connects #6 AWG through #1/0 ground wire.
Add suffix -T for tin plating. Add suffix -MBL for stainless steel 1/2"–13 x 1" mounting bolt and lock washer with any of the ADS clamps.
EM ADS-207-90 Spade mountable transformer ground clamp with jaw-tightening bolt on front of clamp; connects #6 AWG through #1/0 ground wire.
Add suffix -T for tin plating. Add suffix -MBL for stainless steel 1/2"–13 x 1" mounting bolt and lock washer with any of the ADS clamps.
EM 209 Transformer ground clamp; accommodates #3 solid through #4/0 stranded.
Add suffix -T for tin plating.
EM ADS-209 Spade mountable transformer ground clamp; accommodates #3 solid through #4/0 stranded.
Add suffix -T for tin plating. Add suffix -MBL for stainless steel 1/2"–13 x 1" mounting bolt and lock washer with any of the ADS clamps.
EM ADS-209-90 Spade mountable transformer ground clamp with jaw-tightening bolt on front of clamp; accommodates #3 solid through #4/0 stranded.
Add suffix -T for tin plating. Add suffix -MBL for stainless steel 1/2"–13 x 1" mounting bolt and lock washer with any of the ADS clamps.
Electric Motion Company, Inc. Winchester Business Park • 110 Groppo Drive • P.O. Box 626 • Winsted CT 06098 • Tel 860/379-8515 • Fax 860/379-7835 • 8 am–5 pm ET, Monday–Friday
