Electric Motion Company - Telephony & CATV Products [Support Clamp for All Figure 8 Facilities]

Support Clamp for All Figure 8 Facilities

Made of high tensile aluminum. Designed to receive 1/2" or 5/8" standard through bolt.

Features

Designed to fit all the various sizes of support strand used for Figure 8 duct or Figure 8 cable (strand sizes .109 – .148 and 3/16" – 1/4").
Serpentine design prevents pull-through and allows cable or messenger-on-duct to be twisted when installed.
Two marked clamp grooves minimize insulation crushing.
Can be used on corners up to 30° with solid support members, and 20° with stranded.

Ordering Information

EM 0925
Figure 8 support clamp.

Standard packaging: 25/bx, 30 lb/bx. [Please note: There is no minimum order. When ordering, the number you enter for “Quantity” will indicate the number of clamps, not the number of boxes.]

EM 0925.750
Same as EM 0925, above, except with 13/16" middle hole for attaching 3/4" hardware.

Electric Motion Company, Inc.
Winchester Business Park • 110 Groppo Drive • P.O. Box 626 • Winsted CT 06098 • Tel 860/379-8515 • Fax 860/379-7835 • 8 am–5 pm ET, Monday–Friday

Copyright © 2006–2010 by Electric Motion Company, Inc. All Rights Reserved.